Sales Hotline (Press Option 2 then 1) 020 8644 8143 Lines open 09.00 - 13.00/14.00 - 16.30 (Mon - Fri)
Angel Plastics offer a range of guttering products ranging from leafguards, gutter guards, snowguards, pigeon spikes and other accessories to complete your installation
2 metre length of galvanised snowguard. Brackets need to be fitted at one metre centres. You will need 3 brackets…
This type of bracket will allow for the snowguard to be fixed at the front edge of the gutter…
Can be stuck on to any flat surface to prevent pigeons nesting in areas that could be inconvenient to people…
Pigeon spikes can be fitted directly onto gutters if this clip is used. You will need 2 clips per 333mm…
4 metre length. The 'easiest to fit' leafguard on the market. Simply lay it inside the gutter.
Will fit all…
4 metre length and this one in white. The 'easiest to fit' leafguard on the market. Simply lay it inside…
4 metre length. The 'easiest to fit' leafguard on the market. Simply lay it inside the gutter
Will fit Polypipe…
Will accept pipes up to 110mm Diameter and will cover drains up to 300mm wide x 265mm. Manufactured in external…
Will fit both…
5 metre pack which is only suitable for half round and squareline gutters. This gutter guard clips together and will…
These 5mm spacers are ideal for standing the pipe off the wall to avoid wall obstructions. They can be doubled…
Use this product to support existing cast iron gutters that have begun sagging. The bracket can be pushed up under…
These are to be fitted onto either the standard pipe clip or the socket pipe clip to bring the pipe…
Will fit 80mm round pipe. Water butt must be sited within 500mm of this diverter.
Little device used for directing rainwater into a water butt. Will fit all 68mm round and 65mm square rainwater pipes.…
Using a holesaw, cut an equivalent sized hole in the bottom of the gutter and guide this fitting into…
390mm x 390mm x 40mm reinforcement tile for providing a firm base over grassy areas. Simple to install and will…
Plonk this in a 60-70mm outlet and you will prevent the majority of leaf debris from entering your pipe system.
Plonk this in a 71-90mm outlet and you will prevent the majority of leaf debris from entering your pipe system.
Plonk this in a 91-110mm outlet and you will prevent the majority of leaf debris from entering your pipe system.