Sales Hotline (Press Option 2 then 1) 020 8644 8143 Lines open 09.00 - 13.00/14.00 - 16.30 (Mon - Fri)
Ring seal top with solvent weld bottom (double socket) To create a swanneck simply cut a section of plain pipe…
Socket end must be solvent welded. Spigot end will fit into a push fit socket. To create a swanneck simply cut…
Used for changing pipe direction. This fitting has a single solvent weld socket. The other end will fit into another…
Used to connect 32mm waste to soil pipe.This fitting has a single solvent weld socket. The other end will fit…
Used to connect 40mm waste to soil pipe.This fitting has a single solvent weld socket. The other end will fit…
Used to connect 50mm waste to soil pipe.This fitting has a single solvent weld socket. The other end will fit…
This fitting comes with 3 boss shoulders to connect 32,40 or 50mm waste pipes.Requires boss adaptors (see further down page).This…
Use this to make sure your pipe set up is watertight. Simply fit into the end of your pipe and…
Used to join branch pipe to vertical pipe at an angle of 92.5 deg and comes with 4 boss shoulders…
Used to join double branch pipes to vertical pipe at an angle of 87.5 deg. This fitting has four solvent…
This fitting comes with 4 boss shoulders to connect 32,40 or 50mm waste pipe.Requires boss adaptors (see above) It has…
This fitting is used for pipe cleaning or inspection and has screwed access cap.This fitting has a solvent weld socket…
Socket tail access cap. This can be solvent welded to any plain length of pipe to allow for pipe cleaning…
For use with both the galvanised and metal coated pipe clips that do not have a backplate. Click on 'More…
Push fit rubber adaptor to allow boss shoulders, strap boss or wastepipe adaptors to recieve 32mm waste pipe.
Push fit rubber adaptor to allow boss shoulders, strap boss and wastepipe adaptors to recieve 40mm waste pipe.
This fitting is a reducer to waste which will fit into a socketed fitting. It requires a boss adaptor(see above)…
Designed to fit a soil stack in the corner of a room. Allows connections to 32mm, 40mm and 50mm waste…
the AAV70-110 is an ideal air admittance valve for 70mm, 75m, 90mm and 110mm soil pipe systems. When installed into sanitary…
This fitting connects all types and sizes of waste pipe to 110mm underground drainage. Simply use a saw or trimming knife…
