Sales Hotline (Press Option 2 then 1) 020 8644 8143 Lines open 09.00 - 13.00/14.00 - 16.30 (Mon - Fri)
Standard V Groove cladding generally used for making up large soffit overhangs but can also be used for wall cladding.
Please refer to the fitting instructions prior to purchase and installation
5 metre length. Neatly finishes the bottom of the cladding. This trim will need to be tacked on so that…
5 metre length. This trim will cover up the gap at the bottom of the first board created by the…
5 metre length. This trim will cover up the gap on the vertical edge of the cladding created by…
5 metre length. This profile used for joining boards of over 5 metres in length in one strip as opposed…
5 metre length. 2 part trim used for joining a whole strip of cladding in one go. Simply fit the…
5 metre length. 2 part trim primarily used for finishing off the top edge. Simply fit the first part and…
5 metre length. 2 part trim used for internal & external corners. Simply fit the first part and bring the…
305 metre roll x 75mm wide. This handy flyscreen mesh will prevent insects entering the loft space through the grooves…
A4 Marine Grade Stainless Steel. Box of approx 250 pins.For use with shiplap and tongue/groove cladding. Also for use with…
1 Litre of fast acting industrial strength cleaner used for the removal of stubborn stains to white upvc. Smells of pear…
Very strong cleaner. Will literally remove scratches from upvc by melting the plastic. Very good for remedying scratches to upvc…
500ml can of cleaner for a variety of uses, worth keeping a can in the van. Click…
Simply spray onto the surfaces that need to be bonded, wait for the vapour to dry a little and then…
Used mainly for precision cutting of angle and edging trims. Also used for cutting aluminium and upvc downpipe and gutters.
high quality single component joint sealant with high adhesive strength and initial tack. It is based on MS-Polymer®, chemically neutral…