Sales Hotline (Press Option 2 then 1) 020 8644 8143 Lines open 09.00 - 13.00/14.00 - 16.30 (Mon - Fri)
Ring seal top with solvent weld bottom (double socket) To create a swanneck simply cut a section of plain pipe…
Socket end must be solvent welded. Spigot end will fit into a push fit socket. To create a swanneck simply cut…
Back fix nut & bolt strap boss. Used to connect 32,40 or 50mm waste pipes to existing UPVC soil pipe.…
Used to join branch pipe to vertical pipe at an angle of 112 deg.It also has screwed access cap for…
Socket tail access cap. This can be solvent welded to any plain length of pipe to allow for pipe cleaning…
Use this to make sure your pipe set up is watertight. Simply fit into the end of your pipe and…
For use with both the galvanised and metal coated pipe clips that do not have a backplate. Click on 'More…
Push fit rubber adaptor to allow boss shoulders, strap boss or wastepipe adaptors to recieve 32mm waste pipe.
Push fit rubber adaptor to allow boss shoulders, strap boss and wastepipe adaptors to recieve 40mm waste pipe.
This fitting is a reducer to waste which will fit into a socketed fitting. It requires a boss adaptor (see…
This will connect an 82mm pipe to a 110mm pipe. The 82mm part will fit onto a plain 82mm pipe…
The 68mm part is a socket, meaning that the 68mm pipe will fit inside. The 110mm part is a spigot,…
Designed to fit a soil stack in the corner of a room. Allows connections to 32mm, 40mm and 50mm waste…
the AAV70-110 is an ideal air admittance valve for 70mm, 75m, 90mm and 110mm soil pipe systems. When installed into sanitary…
This product will connect a 110mm plastic pipe into a 95mm - 110mm cast iron underground cast section. This product…
This fitting connects all types and sizes of waste pipe to 110mm underground drainage. Simply use a saw or trimming knife…
