Sales Hotline (Press Option 2 then 1) 020 8644 8143 Lines open 09.00 - 13.00/14.00 - 16.30 (Mon - Fri)
This slight angled bend is used to change the 110mm pipe direction, the spigot end of the bend fits into…
Ring seal inlet, spigot outlet at 45 degrees, provides a water trap. It can be converted to a "S" trap…
Aluminium sealed access cover, used in lieu of the polypropylene grid on the bottle gullies. Simply sits on top of…
200mm in height. Simply remove grid to bottle gully, insert this piece in and then refit grid to raise gully by…
Fits onto the spigot of 110mm UPVC drainage pipe so that 68mm round rainwater pipe can be connected to the…
Provides at ground level access to the drainage system for cleaning purposes, made from aluminium and comes with a socket…
Provides at ground level access to the drainage system for cleaning purposes, made from aluminium. Comes complete with plate &…
A bend with a screw on cap on the "heel" that can be removed for access to the drainage system…
A screw on plug and spigot tail fitting that can be fitted into the socket of a 110mm pipe or…
A15 Rating = Pedestrians, Cycles & Light domestic vehicles only.
Recessed, square to round cover allows block paving and slabs to be laid over access covers to give a neat…
Come with straight through inlets plus 2 further ones at 45 degrees (capped off with plugs) Please use with 320mm…
Combined Range from Polypipe, Floplast, Flexseal & Clark Drain